Profile Photo

Control Ball Valve Failure And Its Solutions

  • Public Group
  • 6 months, 2 weeks ago
  • 0

    Posts

  • 1

    Members

Description

SS Ball Valve is a unique ball valve system which utilizes the principle of centrifugal force to regulate the flow of water or other liquids. The rotating motion of the ball causes a valve to close or open depending upon the amount of pressure at its opposite ends. If you have any thoughts about exactly where and how to use on front page, you can speak to us at our own webpage. This ball valve system operates as per an actuator. There are various types of this valve systems available which vary in their mechanism and design.
Valtor Industrial Bladder Control Valve Sets is a superior quality solution to your high capacity industrial Dribble Control Valve requirements. Valtor offers ball adaptors in different sizes ranging from 1/4″ to 6″. The fittings and gaskets available with this system are stainless steel, brass or bronze.
Check Valve Sets are used for general engineering controls in power failure situations. These are usually equipped with dual blades that have variable damping control. The main advantage with these types of valves is that they can be used with a variety of pumps including reciprocating pumps, displacement pumps and inboard/outboard mixer pumps. They are capable of regulating the flow rate of the liquid through the pump control ball valve or check valve system.
SS Flow Control Valve Sets are specifically designed to regulate the rate of flow of a fluid during any stage of its distribution. The set comprises of two bellows that are symmetrically connected to each other. The valves are enclosed by a stainless steel or bronze body with the adjustable valve faces being contained within the bellow.
The control valves are usually designed to reduce the pressure loss by using a second closing member. Such sets are very robust and long lasting; however they can be adversely affected by small pressures. They should be regularly serviced to ensure that the valve assembly does not fracture. This inspection should be done at least once a year.
If there is no seal between the ball and the body of the valve, then the flow coefficient will increase and a higher pressure will be generated. As a result of the increased fluid velocity, the pressure drop will also increase and so on. When the pressure drop exceeds the maximum allowable limit and the flow stops, then the control ball will come into contact with the outer body of the valve and will cause it to shut down. The increased flow coefficience will then result in an increase in the fluid velocity.
The main cause of this type of valve failure is excessive flow. Tight and narrow shafts are one of the most common causes of this problem. As the fluid velocity increases, the angle of the bend in the shaft also increases. The bending of the shaft leads to an increase in the fluid velocity at the contact surface. A valve with poor sealing and/or a defective or worn-out ball nut may also cause this type of headloss. To solve the problem, replace the worn-out ball nut.
If the pump control ball valve cannot be found to be the root of the problem, then the first step is to find out what type of closing member or sleeve is faulty. As already discussed, the majority of pump control ball failures are caused by a worn-out or defective ball nut. It is very important to replace such ball nuts immediately, else you can cause irreversible damage to the pump seal. There are many ways of testing the operation of the pump control ball valve; but in this article, we shall discuss the most popular test method – the electric motor actuator tests. The electric motor actuator is used to test the valve’s ability to close and open, as well as its performance in a mixed state. For this reason, it is widely used in control testing programs.

Who’s Online

There are no users currently online

Members

Who’s Online

There are no users currently online

Recently Active Members

Profile picture of StorbJed
Profile picture of Karenrof
Profile picture of Janetchiep
Profile picture of WendyCroks
Profile picture of pradeep
Profile picture of Niranjan
Profile picture of Stanleyaudit
Profile picture of isojele
Profile picture of skyreveryBremo
Profile picture of Pleplypat
Profile picture of Injurse
Profile picture of Breaway
Profile picture of UncedeCek
Profile picture of ulcerie
Profile picture of Raakesh V

New Report

Close